Verwenden Sie den Reader unten, um das Dual XDM6400 Autoradio Bedienungsanleitung zu lesen. Sie können die Anleitungen direkt auf der Seite durchblättern und die Funktionen unseres Readers nutzen, um alle wichtigen Informationen zur Installation, Bedienung und Wartung dieser Dual Autoradio zu finden.
Bedienungsanleitung
VollbildFehlercodes
Nachfolgend finden Sie die Fehlercodes für den Dual XDM6400.
Disc read error
Press EJECT or RESET
Focus error or disc is in upside down
Press EJECT or RESET
Fehlerbehebung
Praktische Tipps zur Lösung der häufigsten Probleme mit Dual XDM6400.
Ursache: Yellow wire not connected or incorrect voltage
Check connections for proper voltage (11~16VDC)
Ursache: Red wire not connected or incorrect voltage
Check connections for proper voltage (11~16VDC)
Ursache: Black wire not connected
Check connection to ground
Ursache: Fuse blown
Replace fuse
Ursache: Speaker wires not connected
Check connections at speakers
Ursache: One or more speaker wires touching each other or touching chassis ground
Insulate all bare speaker wires from each other and chassis ground
Ursache: Yellow or red wire touching chassis ground
Check for pinched wire
Ursache: Speaker wires touching chassis ground
Check for pinched wire
Ursache: Incorrect fuse rating
Use fuse with correct rating
Ursache: Unit is not mounted correctly or backstrap is not secure
Check mounting sleeve and backstrap support
Ursache: Physical defect in media (CD, CD-R or CD-RW)
Check media for scratches
Ursache: The WMA file is copy-protected by DRM (Digital Rights Management)
Write disc using WMA files that are not copy-protected
Ursache: Selected file is not available in direct or alphanumeric search modes
Repeat search using valid parameters
Ursache: The file format is incompatible with .mp3 or .wma file extensions
Write disc using valid audio files
Ursache: CD mechanism position out of alignment
Press and hold EJECT for 3 seconds to reset CD mechanism position
Ursache: CD transit screws still in place
Remove 2 transit screws located on top of the unit
Ursache: Pairing attempt has exceeded 60 seconds
Retry pairing sequence. Pairing must complete within 60 seconds
Ursache: Phone is not setup correctly to connect to a bluetooth hands free device
Check the owners manual for instructions on enabling bluetooth
Ursache: Bluetooth device is not compatible with the BTM60
Call 1-866-382-5476 for the latest compatibility information
Ursache: Reset the BTM60 to clear the memory of previously paired mobile devices and to clear recent dialed/missed/received phone calls from memory
From Bluetooth standby mode, press and hold MODE for BTM60 reset. Note: ACNT will be set to OFF after the BTM60 is reset
Ursache: An invalid ID3 tag version is present
Version 1.x ID3 tags are supported. Version 2.0 or greater are not supported
Hilfe
Hast du Fragen zur Autoradio XDM6400 von Dual? Stelle sie direkt unserem Experten! Du erhältst Informationen, praktische Tipps und maßgeschneiderte Lösungen in nur wenigen Sekunden.
Ähnliche Bedienungsanleitungen
Unten finden Sie Bedienungsanleitungen für Autoradio, die ähnlich wie XDM6400 sind. Versuchen Sie auch, alle Dual Autoradio Bedienungsanleitungen anzusehen
Diskussion
Hinterlassen Sie einen Kommentar oder stellen Sie eine Frage
An der Diskussion teilnehmen
Stellen Sie eine Frage zum Handbuch oder fügen Sie eine hilfreiche Antwort für andere Nutzer hinzu.