Verwenden Sie den Reader unten, um das Zebra P100i Etikettendrucker Bedienungsanleitung zu lesen. Sie können die Anleitungen direkt auf der Seite durchblättern und die Funktionen unseres Readers nutzen, um alle wichtigen Informationen zur Installation, Bedienung und Wartung dieser Zebra Etikettendrucker zu finden.
Bedienungsanleitung
VollbildFehlercodes
Nachfolgend finden Sie die Fehlercodes für den Zebra P100i.
Printer is determining type of ribbon installed
No action required -- status message only.
Ribbon may be improperly installed
Reload ribbon cartridge. Refer to Chapter 2 for details on loading a ribbon cartridge.
The magnetic encoder head needs cleaning
Use the standard cleaning card process described in Chapter 5.
Printer needs to be cleaned (displayed after 1000 cards have been printed)
Clean the printer. Refer to Chapter 5 for details on how to clean the printer.
A command error occurred
Reset the Printer, and try printing the card again.
A contact error occurred
Reset the Printer, and try printing the card again.
A contactless error occurred
Reset the Printer, and try printing the card again.
The cover is open
Make sure that the cover is completely and securely closed.
The contact data is invalid
Reset the Printer, and try printing the card again.
The contactless data is invalid
Reset the Printer, and try printing the card again.
The magnetic data may be invalid
Check data format.
A mechanical error occurred; e.g., card jam
Remove jammed card.
Ribbon may be entirely used
Load a new ribbon cartridge. Refer to Chapter 2 for details on loading a ribbon cartridge.
A parameter error occurred
Reset the Printer, and try printing the card again.
Displayed during the printer cleaning process
Remove the ribbon.
Fehlerbehebung
Praktische Tipps zur Lösung der häufigsten Probleme mit Zebra P100i.
Ursache: Contamination on the card surface or cleaning roller not installed
Check that cards are stored in a dust free environment. Use a different supply of cards. Clean the printer and check that the protective cover was removed from the ribbon cartridge cleaning roller. Replace the Cleaning Roller if necessary.
Ursache: Ribbon cartridge is not correctly positioned or printhead is dirty
Ensure that the ribbon is properly rolled onto the ribbon cores with no wrinkles. Replace ribbon cassette if necessary. Clean the Printhead.
Ursache: Ribbon cartridge stored improperly or damaged, cards not meeting specifications, contrast/intensity settings too high, or dust on printhead
Change ribbon cartridge and print again. Use a different supply of cards. Adjust Contrast and/or Intensity values in software. Clean the Printhead.
Ursache: Ribbon cartridge not correctly positioned, ribbon not synchronized on correct color panel position, cards not meeting specifications, or dust on cleaning roller
Check that ribbon is properly rolled with no wrinkles. Replace ribbon cartridge ensuring it locks in place. Open and close lid to synchronize ribbon. Use a different supply of cards. Clean the Printhead and replace the Cleaning Roller.
Ursache: Ribbon cartridge not installed, cards not meeting specifications, or printhead cable disconnected
Check for ribbon cartridge in the printer. Use a different supply of cards. Call Service for Printhead repair or replacement information.
Ursache: Ethernet Adapter has not detected the presence of a network cable
Verify that the network cable is appropriate and has an RJ-45 connector. Turn the printer power OFF and remove the network cable from the Ethernet Adapter. Plug the network cable back in until you hear a positive click. Check the other end of the cable in the same manner. Turn the printer power on. Connect the Ethernet Adapter to a known good network connection if problem persists.
Ursache: Ethernet Adapter is trying to print but printer has errors or no media/ribbon
Verify that the printer has media and ribbon. Check for printer errors and resolve them. The LED will continue to blink until the printer malfunction is resolved or until the printer is turned OFF.
Ursache: Ethernet Adapter has failed the POST (Power On Self Test)
Turn the printer power off, wait 10 seconds, then turn the printer back ON. If the Ethernet Adapter still fails the POST, the Ethernet Adapter has a hardware problem that requires replacement or return. Contact Technical Support for repair or replacement information.
Ursache: Ethernet Adapter is in firmware-download mode waiting for new firmware data
If the Ethernet Adapter was purposely put into firmware-download mode, finish the download with the proper update utility. Contact the Zebra web site at http://www.zebracard.com and click on the Drivers & Downloads tab. Contact Technical Support for help recovering this unit.
Häufig gestellte Fragen
Die häufigsten Fragen zum Zebra P100i.
Hilfe
Hast du Fragen zur Etikettendrucker P100i von Zebra? Stelle sie direkt unserem Experten! Du erhältst Informationen, praktische Tipps und maßgeschneiderte Lösungen in nur wenigen Sekunden.
Ähnliche Bedienungsanleitungen
Unten finden Sie Bedienungsanleitungen für Etikettendrucker, die ähnlich wie P100i sind. Versuchen Sie auch, alle Zebra Etikettendrucker Bedienungsanleitungen anzusehen
Diskussion
Hinterlassen Sie einen Kommentar oder stellen Sie eine Frage
An der Diskussion teilnehmen
Stellen Sie eine Frage zum Handbuch oder fügen Sie eine hilfreiche Antwort für andere Nutzer hinzu.