Danby DAC180EB3WDB Klimaanlagen Bedienungsanleitung

Ambient temperature sensor error

Unplug the appliance, let it stand for 5-10 minutes and then plug it back in. If the error persists, call for service.

Display board communication error

Unplug the appliance, let it stand for 5-10 minutes and then plug it back in. If the error persists, call for service.

Evaporator temperature sensor error

Unplug the appliance, let it stand for 5-10 minutes and then plug it back in. If the error persists, call for service.

Room temperature is higher than 37°C (99°F)

Unplug the appliance, let it stand for 5-10 minutes and then plug it back in. If the error persists, call for service.

Room temperature is lower than 0°C (32°F)

Unplug the appliance, let it stand for 5-10 minutes and then plug it back in. If the error persists, call for service.

Ursache: Filter indicator light illuminates on the control panel approximately every two weeks, or more frequently if there is significant dander or fur in the air.

Remove the air filter from behind the front intake grill, use a vacuum cleaner with soft brush attachment to remove debris, wash in lukewarm soapy water below 40°C, rinse with clean water, dry thoroughly, and reinstall. Press the filter button on the control panel to resume normal functioning.

Ursache: Appliance stored with moisture inside after the season ends.

Before removing the appliance from service for the year, operate it on high fan mode for half a day to ensure the inside is dry. Ensure the filter is clean and dry. Store the appliance covered in a dry location.

Ursache: Air filter is not installed.

Do not operate the appliance without the air filter installed. Always ensure the filter is properly installed before use.