Safety
1
1.01 Directives
1
1.02 General Notes On Safety
1
1.03 Safety Symbols
2
1.04 Important Points For The User
2
1.05 Operating And Specialist Personnel
3
1.05.01 Operating Personnel
3
1.05.02 Specialist Personnel
3
1.06 Danger
4
Proper Use
1
Specifications
1
3.01 Pfaff 1051, Pfaff 1053, Pfaff 1181, Pfaff 1183
1
3.02 Models And Subclasses
2
Disposal Of The Machine
1
Transport, Packaging And Storage
1
5.01 Transport To The Customer
1
5.02 Transport Within The Customer's Premises
1
5.03 Disposal Of The Packaging
1
5.04 Storage
1
Explanation Of The Symbols
1
Controls
1
7.01 On/Off Switch
1
7.02 Keys On The Machine Head
1
7.03 Pedal
2
7.04 Lever For Lifting The Presser Foot
2
7.05 Feed Regulator Disk
3
7.06 Reverse Feed Lever
3
7.07 Knee Lever
4
7.08 Thread Trimmer –731/01
4
7.09 Switch For Thread Wiper -909/04
5
Mounting And Commissioning The Machine
1
8.01 Mounting
1
8.01.01 Adjusting The Table-Top Height
1
8.01.02 Adjusting The V-Belt Tension
2
8.01.03 Mounting The Upper V-Belt Guard
2
8.01.04 Mounting The Lower V-Belt Guard
3
8.01.05 Mounting The Spool Holder
3
8.01.06 Start Inhibitor (Only For Machines With Integrated Sewing Motor)
4
8.01.07 Connecting The Plug Connections And Earth Cable
5
8.02 Commissioning The Machine
5
8.03 Switching The Machine On/Off
5
8.03 Table Top Cutout
6
Preparation
1
9.01 Inserting The Needle
1
9.02 Winding The Bobbin Thread/ Adjusting The Thread Tension
2
9.03 Removing/Inserting The Bobbin Case
3
9.04 Inserting The Bobbin Case / Adjusting The Bobbin Thread Tension
3
9.05 Threading The Needle Thread / Adjusting The Needle Thread Tension
4
9.06 Adjusting The Stitch Length
5
Care And Maintenance
1
10.01 Cleaning The Machine
1
10.02 Topping Up The Oil Tank (Only On Pfaff 1181 And Pfaff 1183)
2
Adjustment
1
11.01 Notes On Adjusting
1
11.02 Tools, Gauges And Other Accessories For Adjusting
1
11.03 Abbreviations
1
11.04 Checking And Adjusting Aids
2
11.05 Adjusting The Basic Machine
3
11.05.01 Basic Position Of The Machine Drive
3
11.05.02 Preadjusting The Needle Height
4
11.05.03 Bottom Feed Neutral Position
5
11.05.04 Neutral Position Of The Needle Feed (Only On Pfaff 1051 And 1181)
6
11.05.05 Bottom Feed Lifting Motion
7
11.05.06 Bottom Feed Dog Height
8
11.05.07 Feed Dog Motion Of Bottom Feed Dog
9
11.05.08 Feeding Motion Of Needle Feed (Only On Pfaff 1051 And 1181)
10
11.05.09 Needle In Needle Hole Center (Only On Pfaff 1053 And 1183)
11
11.05.10 Needle To Needle Hole Centre (On Pfaff 1051 And Pfaff 1181)
12
11.05.11 Synchronous Strokes Of Needle- And Drop Feed (Only On Pfaff 1051 And Pfaff 1181)
13
11.05.12 Hook Shaft Bearing And Backlash
14
11.05.13 Hook Lubrication (Only For Pfaff 1181 And 1183)
15
11.05.14 Needle Rise, Hook-To-Needle Clearance, Needle Height And Bobbin Case Position Finger
16
11.05.15 Thread Check Spring And Slack Thread Regulator
17
11.05.16 Position Of Knee Lever
18
11.05.17 Knee Lever Stop
19
11.05.18 Bobbin Winder
20
11.05.19 Limiting The Stitch Length
21
11.05.20 Presser Foot Pressure
22
11.05.21 Modifying The Needle Bar Stroke
23
11.06 Adjusting The Edge Trimmer –731/01
24
11.06.01 Zero Position Of The Knife
24
11.06.02 Cutting Motion
25
11.06.03 Knife Height
26
11.06.04 Knife Position In Sewing Direction
27
11.06.05 Knife Position Crosswise To Sewing Direction
27
Diskussion
Hinterlassen Sie einen Kommentar oder stellen Sie eine Frage
Hallo, ich habe eine Pfaff 1051 und seit kurzem macht der Oberfaden immer Schlaufen auf der Unterseite des Stoffes. Ich habe schon die Nadel gewechselt aber das Problem bleibt. Hat jemand eine Idee woran das liegen könnte?
Das kenne ich gut von meiner 1051, das ist meistens ein Problem mit der Oberfadenspannung oder der Einfädelung. Prüf mal ob der Faden richtig durch alle Fadenführer läuft und der Hebel korrekt eingehängt ist. Oft hilft es auch die Spule rauszunehmen und den Greifer zu reinigen, da sammelt sich Fusseln an. Schau im Handbuch unter Fadenspannung nach, da steht genau welche Einstellung für welchen Stoff passt.
An der Diskussion teilnehmen
Stellen Sie eine Frage zum Handbuch oder fügen Sie eine hilfreiche Antwort für andere Nutzer hinzu.