Verwenden Sie den Reader unten, um das General Electric GDP630PMRES Spülmaschine Bedienungsanleitung zu lesen. Sie können die Anleitungen direkt auf der Seite durchblättern und die Funktionen unseres Readers nutzen, um alle wichtigen Informationen zur Installation, Bedienung und Wartung dieser General Electric Spülmaschine zu finden.
Bedienungsanleitung
VollbildFehlercodes
Nachfolgend finden Sie die Fehlercodes für den General Electric GDP630PMRES.
Dishwasher fails to operate correctly
Turn off water to unit (if possible). Turn off power to unit. If the water cannot be turned off, DO NOT turn off power and keep door closed. Press Cancel key one time to silence alarm tone. Call service.
Motor controller failure
Call service
User interface service communication fault
Call service
Wash motor failure
Call service
Dishwasher overflows
Turn off water to unit (if possible). Turn off power to unit. If the water cannot be turned off, DO NOT turn off power and keep door closed. Press Cancel key one time to silence alarm tone. Call service.
Fill valve stuck on
Turn off water to unit (if possible). Turn off power to unit. If the water cannot be turned off, DO NOT turn off power and keep door closed. Press Cancel key one time to silence alarm tone. Call service.
Dishwasher will not drain
If drain hose is connected to a garbage disposal, confirm that drain hose is not clogged and disposal plug has been knocked out. If unit still will not drain, call service.
Water present under dishwasher
Call service
No water present at dishwasher
Ensure fill hose is connected to product. Ensure water supply is turned ON. Press Start to resume cycle. If alarm still present, call service.
Fehlerbehebung
Praktische Tipps zur Lösung der häufigsten Probleme mit General Electric GDP630PMRES.
Ursache: Drain sequence issue or fill valve problem
Check water supply connection and ensure water is turned ON. Verify drain hose is not clogged.
Ursache: Clogged drain hose or garbage disposal issue
Check that drain hose is not clogged. If connected to garbage disposal, ensure disposal plug has been removed.
Ursache: Fill hose disconnected or water supply turned off
Verify fill hose is properly connected to the product. Ensure water supply is turned ON.
Ursache: Improper installation location
Ensure location provides convenient access, level floor, proper clearance (2 inches minimum at sides), and is not over carpeted flooring.
Ursache: Water pressure outside acceptable range
Have a licensed plumber verify water pressure is between 20 psi and 120 psi. Ensure water temperature at dishwasher is 120°F.
Häufig gestellte Fragen
Die häufigsten Fragen zum General Electric GDP630PMRES.
Hilfe
Hast du Fragen zur Spülmaschine GDP630PMRES von General Electric? Stelle sie direkt unserem Experten! Du erhältst Informationen, praktische Tipps und maßgeschneiderte Lösungen in nur wenigen Sekunden.
Ähnliche Bedienungsanleitungen
Unten finden Sie Bedienungsanleitungen für Spülmaschine, die ähnlich wie GDP630PMRES sind. Versuchen Sie auch, alle General Electric Spülmaschine Bedienungsanleitungen anzusehen
Diskussion
Hinterlassen Sie einen Kommentar oder stellen Sie eine Frage
An der Diskussion teilnehmen
Stellen Sie eine Frage zum Handbuch oder fügen Sie eine hilfreiche Antwort für andere Nutzer hinzu.